Badger Meter FC-5000 User Manual page 28

Programming
Changing Custom Units
1� Highlight CUST and press ENTEO�
The display populates with additional icons that need to be modified for
custom units�
2� Press F2 (custom label)� Use the soft keys in conjunction with the numeric
keypad and UP/DOWN keys to create a custom label, then press ENTEO� See
Table 1 on page 17 and Table 2 on page 18 for button functionality�
3� On the confirmation screen, press ENTEO to confirm the new custom unit� The
new label displays in the selection list�
4� Press F3 (conversion) to assign a conversion factor for this custom unit� The
number entered will be a factor of gallons-per-minute�
5� Press ENTEO to save the change�
6� On the confirmation screen, press ENTEO to confirm the change�
As a conversion factor example, if you enter 2, the custom unit is equivalent to
2 gallons per minute� If you enter 0�5, the custom unit is equivalent to 1/2 gallon
per minute�
Display Precision
The Display Precision parameter determines the resolution of a value indicated by
the number of digits after the decimal place�
1� Highlight the drop-down menu for DISPLAY POECISION and press ENTEO�
2� Press the UP/DOWN keys to highlight a display precision from 1...4
and press ENTEO�
Oadix
The Radix parameter determines if a period or comma is used to represent a
decimal place�
1� Highlight the drop-down menu for OADIX and press ENTEO�
2� Press the UP/DOWN keys to highlight either the decimal point ( � ) or the
comma ( , ) and press ENTEO�
Page 28 CTL-UM-01723-EN-01 July 2016