Table of Contents
Advertisement
VERSION 1.0.0
On the KEBA pendant, tap Import Unlock Certificate.
1
Insert the USB into your Forge hub.
2
Click Load Unlock Certificate from USB Drive.
3
Enter your license code.
4
Tap Load Unlock Certificate.
5
Note: Forge/OS will return you to the licensing home screen and show an active
license. If the license status isn't Active, restart these license activation steps.
If you need to update Forge/OS from a USB drive, you can do that through the System
8
Update screen.
Note: Contact READY Robotics for an update file. Update files are too large for the
FAT32 file format. Use an exFAT or NTFS formatted USB drive to download and install
the update. Don't use the USB installer that you installed Forge/OS with unless you clean
and reformat it.
Tap System Update to open the update screen.
1
© 2021 COPYRIGHT READY Robotics ALL RIGHTS RESERVED
17
Advertisement
Table of Contents
