Symbols; Terms - Bosch SYEPS 1X Series Operating Instructions Manual

8/132 About this documentation
Bosch Rexroth AG, SYEPS series 1X, RE 30201-B/07.2014
• Type and source of hazard!: identifies the type or source of the hazard
• Consequences: describes the consequences in the case of non-observance
• Precautions: states, how the hazard can be avoided
Table 2: Hazard classes according to ANSI Z535.6-2006
Warning sign, signal word
DANGER
WARNING
CAUTION
NOTICE
1.3.2

Symbols

The following symbols refer to notes, which are not relevant to safety, but increase
the legibility of the documentation.
Table 3: Meaning of symbols
Symbol Meaning
If this information is disregarded, the product cannot be used or operated
in an optimum manner.
▶ Individual, independent step of action
1.
Numbered instructions for action:
The numbers indicate that the activities are to be carried out consecutively.
2.
3.
1.3.3

Terms

The following terms are used in this documentation:
Table 4: Terms
Term Meaning
ER command value Pump command value
HNC100 Digital axis control for electrohydraulic punching axes for High and
Advanced: SYHNC100-NIB-1-3X/... for Standard: VT-HNC100-1-3X/...
RE xxxxx Rexroth document in English language
SYEHL Punching axis consisting of control block and cylinder
SYEPS Electrohydraulic punching system
Precharge pressure Gas charge pressure p0 of the hydraulic accumulator
WIN-PED® Operator software WIN-PED® 6 or WIN-PED® 7 for the HNC100
WIN-PED project Data directory in which the software data of the HNC100 are saved
WinView Program for visualizing recorded variables in conjunction with WIN-PED®
Meaning
Indicates a hazardous situation which, if not avoided, will
certainly result in death or serious injury.
Indicates a hazardous situation which, if not avoided, could
result in death or serious injury.
Indicates a hazardous situation which, if not avoided, could
result in minor or moderate injury.
Damage to property: The product or the environment can be
damaged.