Table of Contents
Advertisement
6/72
A10FZO, A10VZO, A10FZG and A10VZG series 10 | About this documentation
Bosch Rexroth AG, RE 91485-01-B/2021-11-18
1�3 Representation of information
Uniform safety instructions, symbols, terms and abbreviations are used throughout
this documentation to ensure safe and proper use of the product. For clarification,
they are explained in the sections below.
1�3�1 Safety instructions
This documentation contains safety instructions in chapter 2.6 "Product-specific
safety instructions" on page 11 and in chapter 3 "General instructions on
property damage and product damage" on page 15, as well as before a sequence
of actions or an instruction for action involving a risk of personal injury and
property damage. Always follow the measures for danger prevention associated
with the use of this product.
Safety instructions are set out as follows:
Type and source of danger!
Consequences of non-compliance
▶ Danger prevention measures
• Warning sign: draws attention to the danger
• Signal word: identifies the degree of the danger
• Type and source of danger: indicates the type and source of the danger
• Consequences: describes the consequences of non-compliance
• Precautions: states how the danger can be avoided
Tabelle 2: Hazard classes as defined in ANSI Z535�6
Warning sign, signal word
DANGER
WARNING
CAUTION
NOTICE
1�3�2 Symbols
The following symbols indicate notices that are not safety-relevant but increase
understanding of the documentation.
SIGNAL WORD
Meaning
Identifies a dangerous situation that will result in death or
serious injury if it is not avoided.
Identifies a dangerous situation that may result in death or
serious injury if it is not avoided.
Identifies a dangerous situation that may result in minor to
moderate injury if it is not avoided.
Property damage: The product or surrounding area may be
damaged.
Advertisement
Table of Contents
