Tools And Supplies Needed; Unit Specs - Kasco J Series Operation & Maintenance Manual

installed a minimum of 5 feet (3m in Canada) from the body of water unless separated from the body of water by a fence, wall, or
other permanent barrier that will make the unit inaccessible to persons in the water� A complete list of control panels can be found
in the Accessories section of kascomarine�com�
Additional Notes
During flotation operation, water is pulled from 360° around and directly below the unit. Keep these areas clear of debris as much as
possible to decrease frequency of screen cleaning�

TOOLS AND SUPPLIES NEEDED

• (3) Anchors or stakes for installing unit
• 208-240V electrical supply near pond on a post with room for mounting the control panel
• (4) #10 x 1'' long or longer screws for mounting the control panel
• 9/16'' socket with extension and ratchet (optional)
• 7/16'' socket and ratchet or combination wrench (optional)
• (3) 12'' pieces of 1'' galvanized pipe for weighting ropes (optional)

UNIT SPECS

Model HP Voltage
8400JF 2 208-240
3.1JF
3 208-240
5.1JF 5 208-240
2.3JF
2 208
3.3JF
3 208
5.3JF
5 208
7.3JF
7�5 208
2.3HJF 2 460
3.3HJF 3 460
5.3HJF 5 460
7.3HJF 7�5 460
2 – 3 HP J SERIES FOUNTAIN
Operating Amps Locked-Rotor Amps
Single-Phase Units
10
13�4
20
3-Phase Units
7�5
10�3
16
20
3�8
5�2
8
10
Control Panel Connection
40 Hardwire C-85
61 Hardwire C-95
97 Hardwire C-95
40
70
100
100
See control panel instructions
24
40
49
50
3
Back to Contents
MANUAL
Unit Connection
Hardwire C-85
Hardwire C-95
Hardwire C-95
884168 / 2021.1.1