Honda FJ500 Manual page 71

62V42000.book 2 ページ ２０１２年１２月７日 金曜日 午前９時１７分
dummyhead dummyhead
MUFFLER
MUFFLER REMOVAL/INSTALLATION
MUFFLER
The engine and muffler become very hot during
operation and they remain hot for a while after
operation.
The muffler removal must be made while the
engine is cold.
Remove the belt cover stay (page 11-2).
MUFFLER PROTECTOR
MUFFLER: NOTE 1
MUFFLER HEX NUT (8 mm) (2)
24 N·m (2.4 kgf·m, 18 lbf·ft)
NOTE 1
9-2
MUFFLER PROTECTOR SCREW (5 x 8 mm) (4)
3 N·m (0.3 kgf·m, 2.2 lbf·ft)
TAIL PIPE SCREW (5 x 8 mm)
3 N·m (0.3 kgf·m, 2.2 lbf·ft)
GASKET
Before installation, remove the carbon deposits with a plastic hammer.
MUFFLER GUIDE
MUFFLER DEFLECTOR
MUFFLER DEFLECTOR/GUIDE
SCREW (4 x 6 mm) (2)
2 N·m (0.2 kgf·m, 1.5 lbf·ft)
TAIL PIPE
–