Honda FJ500 Manual page 25

62V42000.book 4 ページ ２０１２年１２月７日 金曜日 午前９時１７分
dummyhead dummyhead
MAINTENANCE
ENGINE OIL CHANGE
• Drain the used engine oil while the engine is warm.
Warm oil drains quickly and completely.
Remove the front wheel (page 15-14).
DER, DE TYPE:
Place the tiller on a firm level surface, and place a
suitable container [1] under the engine oil drain bolt (10
x 15 mm) [2].
Remove the oil filler cap/dipstick [3], drain bolt and
sealing washer (10 mm) [4] and drain the engine oil into
the suitable container.
Please dispose of used engine oil in a manner that is
compatible with the environment. We suggest you take
used oil in a sealed container to your local recycling
center or service station for reclamation. Do not throw it
in the trash, pour it on the ground, or pour it down a
drain.
Used engine oil contains substances that have
been identified as carcinogenic.
If repeatedly left in contact with the skin for
prolonged periods, it may cause skin cancer.
Wash your hands thoroughly with soap and water
as soon as possible after contact with used engine
oil.
Install the drain bolt and new sealing washer.
Tighten the drain bolt to the specified torque.
TORQUE: 18 N·m (1.8 kgf·m, 13 lbf·ft)
Fill the recommended engine oil (page 3-3).
ENGINE OIL CAPACITY:
0.58 liter (0.61 US qt, 0.51 Imp qt)
Install the oil filler cap/dipstick securely.
Recheck the engine oil level (page 3-3).
Make sure there are no engine oil leaks.
Install the front wheel (page 15-14).
DER, DE TYPE:
3-4
[2] [4]
[1] [3]