Kemppi FastMig MS 200 Operating Manual page 17

MiniLog Level
Synergic Start Time
Synergic Start
Voltage
Start Power
Post Current Time
Synergic MIG Unit
Arc Voltage
Cable Length
© Kemppi Oy / R03
MLo -99 ... +200%
FSt -9 ... +9
FuL -30 ... +30
StA -9 ... +9
PoC -9 ... +9
Unl m/min, mm, A
Ard OFF, on
CAb std, 5 – 80m
50%
Set the minilog power level as a
percentage of the welding power
0 Star time in WiseRoot/WiseThin welding
0 Voltage level in the beginning of
WiseRoot/WiseThin welding
0 Strength of start pulse
(not in WiseRoot or WiseThin)
0 Post current
m/min In 1-MIG and WiseRoot welding, the
parameter shown in left-hand display:
wire feed speed (m/min), sheet thickness
(mm) or average current (A)
OFF on: Display shows arc voltage
OFF: Display shows pole voltage
(not in WiseRoot or WiseThin)
std Cable loss is calculated for optimal arc
control and for the Arc Voltage display
(not in WiseRoot or WiseThin)
EN
15