Printing The Test Patterns Or Lists - Brother HL-1660e Series User Manual

Printing the Test Patterns or Lists

You can check print quality and print a list of available fonts before you
actually start working with the printer. To do so, follow these steps:
1. Make sure that you have already set the toner cartridge and loaded
paper into the cassette or the multi-purpose tray.
2 Turn on the printer. Wait until the display shows the message as
follows.
or
3. Press the SEL switch to set the printer off-line.
The ON LINE lamp goes off.
4. Hold down the SHIFT switch and press the TEST switch.
5. Press the
message appears. To print your selection, press the SET switch.
Choose from one of the following selections :
To print out the demo page,
To print out the test pattern,
To print out the list of printer settings,
To print out the list of internal or resident fonts,
LJ READY 001P T1
LJ READY 001P MP
or switch to scroll through the display until the desired
DEMO PAGE
TEST PRINT
PRINT CONFIG
PRINT FONTS I
CHAPTER 2 GETTING STARTED
2–21