Maintenance - Stuart Turner MAINSBOOST VariQ Installation, Operation & Maintenance Instructions Manual

Table of Contents

Advertisement

6. MAINTENANCE

6.1. Disconnect electrical supply before working on the pump.
6.2. Turn off water supplies to the pump and release pressure by opening water
outlets before attempting maintenance.
6.3.
Cleaners, Disinfectants and Descalents: Acid based descalents and aggressive
cleaning agents must not come into contact with the pump. The pump must be
removed from the system prior to the use of these products. The system should
be flushed to remove all chemicals before the pump is reconnected. If in any
doubt as to the suitability of the chemical solutions, please contact our
TechAssist helpline on +44 (0) 800 31 969 80.
6.4. When the ambient temperature is lower than 4°C and the pump is not in use,
the pump chamber should be drained of water to protect internal components.
- 17 -
Cont ...

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the MAINSBOOST VariQ and is the answer not in the manual?

Questions and answers

Frazer Vaughan
January 22, 2025

The pump is making a loud humming noise probably best described as vibration noise. The water pressure in the house is still normal. I tried resetting the pump but the noise came straight back instantly.

User image 6790b53058825
1 comments:
Mr. Anderson
February 10, 2025

A loud humming or vibration noise in a Stuart Turner MAINSBOOST VariQ pump could be caused by the pump being mounted in a way that amplifies noise through loose panels or pipework. Care must be taken during installation to ensure secure mounting to avoid such noise issues.

This answer is automatically generated

susan bradshaw
February 25, 2025

is it normal that variq pump in my home goes off frequently if no taps are on please

1 comments:
Mr. Anderson
February 25, 2025

No, it is not normal. If the Stuart Turner MAINSBOOST VariQ pump turns off frequently when no taps are on, it may indicate a leak in the system, debris under the non-return valve sealing face, or improper pipework installation. Running the pump at full flow to flush debris or checking and replacing the non-return valve may help resolve the issue.

This answer is automatically generated

Tom Donnery
May 6, 2025

Pump keeps making knocking noise approx every 30 sec when not in use.

User image 681a8c8668d08

This manual is also suitable for:

47322

Table of Contents

Save PDF