Operation; Indicator; Buttons - Epever Tracer-AN Series User Manual

3 Operation

3.1 Indicator

Indicator
Note: The fault indicator refers to chapter 3.3,

3.2 Buttons

Modes
(Load) dry
contact
Clear fault
Browsing mode
Setting mode
Color
Green ON solid
Green
Green Slowly flashing
Green Fast flashing
In manual mode, short press the "ENTER" button to turn on/off the
(Load) dry contact.
Press the "ENTER" button
Short press the "SELECT" button
Long-press the "ENTER" button to enter the Setting mode, and
short press the "SELECT" button to modify the parameter. Then
short press the "ENTER" button to confirm or exit the current
interface automatically after more than 10S.
Status
PV connection is normal, but the
voltage is low and not charging.
No PV voltage(night time) or PV
OFF
connection fault
PV is charging
PV over voltage
"LCD Display."
Note
21
Instruction