Choosing The Handset Volume (For Volume Amplify) - Brother MFC-8220 User Manual

Choosing the Handset Volume
(For Volume Amplify)
Before you begin to use the MFC, you must decide if you need to set
the handset volume to Volume Amplify:On for a user who is
hearing-impaired. The AMPLIFY volume level complies with FCC
standards.
Volume Amplify:Off
This default setting is appropriate if none of the users are
hearing-impaired. During a conversation, users can press Volume
or on the control panel to adjust the volume to Low or High .
When the handset is replaced, the handset volume will remain until
you change it again.
Volume Amplify:On — Temporary
This setting is appropriate if some of the users are hearing-impaired.
During a conversation, users can press Volume
control panel to adjust the volume to Low , High or Amplify . When
the handset is replaced, the handset volume returns to the default
setting of Low .
Volume Amplify:On — Permanent
Choose Volume Amplify:On — Permanent if all of the users
are hearing-impaired. During a conversation, users can press
Volume or
High or Amplify . When the handset is replaced, the handset
volume returns to the default setting of Amplify .
When you press Volume
the volume, the LCD shows the setting you are choosing. Each
key press changes the volume to the next setting.
WARNING
It is important that you do NOT choose Permanent unless ALL
the users are hearing-impaired. Otherwise, the default setting of
Amplify may damage the hearing of some users.
on the control panel to adjust the volume to Low,
or on the control panel to adjust
GETTING STARTED 4 - 9
or on the