Memory Security
Memory Security lets you prevent unauthorized access to the MFC.
You will not be able to continue to schedule Delayed Faxes or Polling
jobs. However, any pre-scheduled Delayed Faxes will be sent when
you turn Memory Security On , so they will not be lost.
If you have selected Fax Forwarding, Paging or Fax Storage (
2
5
,
) before you turn Memory Security On , then Fax Forwarding or
Remote Retrieval will continue to work.
While Memory Security is On the following operations are available:
■ Receiving faxes into memory (limited by memory capacity)
■ Fax Forwarding
■ Remote Retrieval
While Memory Security is On the following operations are NOT
available:
■ Sending faxes
■ Printing received faxes
■ Copy
■ PC printing
■ PC scanning
To print the faxes in memory, turn Memory Security Off .
Setting up the password
If you forget the Memory Security password, please call Brother
Customer Service. (See For Customer Service on page i.)
1
Menu
Press
2
Enter a 4-digit number for the
password.
Set
Press
.
If you are entering the password for the first time, the LCD
shows Verify .
3
Re-enter the password.
Set
Press
.
To change a registered password, select Set Password after
Step 1, enter the old password, and then go to Step 2.
6 - 18 SETUP SEND
2
0
1
,
,
,
.
Menu
Miscellaneous
1.Mem Security
,