Choosing The Handset Volume (For Volume Amplify) (Fax-1820C Only) - Brother MFC-3220C User Manual

Choosing the Handset Volume
(For Volume Amplify) (FAX-1820C only)
Before you begin to use the machine, you must decide if you need to
set the handset volume to Vol Amplify:On for a user who is
hearing-impaired. The AMPLIFY volume level complies with FCC
standards.
Volume Amplify:Off
This default setting is appropriate if none of the users are
hearing-impaired. During a conversation, users can press Volume
or on the control panel to adjust the volume to Low or High .
When the handset is replaced, the handset volume will remain until
you change it again.
Volume Amplify:On — Temporary
This setting is appropriate if some of the users are hearing-impaired.
During a conversation, users can press Volume
control panel to adjust the volume to Low , High or Amplify . When
the handset is replaced, the handset volume returns to the default
setting of Low .
Volume Amplify:On — Permanent
Choose Vol Amplify:On — Permanent if all of the users are
hearing-impaired. During a conversation, users can press Volume
or on the control panel to adjust the volume to Low,High or
Amplify . When the handset is replaced, the handset volume
returns to the default setting of Amplify .
When you press Volume
the volume, the LCD shows the setting you are choosing. Each
key press changes the volume to the next setting.
WARNING
It is important that you do NOT choose Permanent unless ALL
the users are hearing-impaired. Otherwise, the default setting of
Amplify may damage the hearing of some users.
4 - 9 GETTING STARTED
or ton the control panel to adjust
or on the