Table of Contents
Advertisement
13
Optional accessories
Memory board
The memory board is installed on the main controller board inside the
MFC. When you add the optional memory board, it increases the
performance for both copier and printer operations.
32 MB TECHWORKS 12457-0001
64 MB TECHWORKS 12458-0001
128 MB TECHWORKS 12459-0001
In general, the DIMM must have the following specifications:
Type:
CAS Latency:
Clock Frequency:
Capacity:
Height:
Parity:
DRAM Type:
Some DIMMs might not work with this MFC. For the latest
information from Brother visit:
Optional Memory
100 pin and 32 bit output
2 or 3
100MHz or more
32, 64, 128 MB
1.4 inches (35 mm) or less
NONE
SDRAM 4 Bank
http://solutions.brother.com
OPTIONAL ACCESSORIES 13 - 1
Advertisement
Table of Contents
