Table of Contents
Advertisement
Easy Receive
When you use this feature, you do not have to press
Receive Code
beeps. Just hold the handset and wait a few seconds. When you see
Receiving on the LCD or when you hear "chirps" through the
handset of an extension phone connected to another wall jack, just
replace the handset. Your MFC does the rest. Selecting On allows
the MFC to receive fax calls automatically, even if you lift the handset
of an extension or external phone. Selecting Semi lets the MFC
receive the call only if you have answered it at the MFC. Selecting
Off means you will have to activate the MFC yourself, by pressing
Start
or by pressing
(See Operation from extension telephones on page 5-7 and For
Fax/Tel mode only on page 5-7.)
If you have set the feature to On , but your MFC does not
automatically connect a fax call when you lift an external or
extension phone handset, press the Fax Receive code
At the MFC, lift the handset and then press
If you send faxes from a computer on the same phone line and
the MFC intercepts them, set Easy Receive to Off .
1
If it is not illuminated in green, press
2
Menu
Press
3
Use
or
or Off .
Set
Press
.
4
Stop/Exit
Press
5 1
when you answer a fax call and hear calling
5 1
if you are not at your MFC.
2
1
3
,
,
,
.
to select On , Semi ,
.
Start
or the Fax
Start
.
Fax
(
).
Setup Receive
3.Easy Receive
SETUP RECEIVE 5 - 4
5 1
.
Advertisement
Table of Contents
