Setting Your Station Id - Brother MFC-7840W Quick Setup Manual

STEP 1
Setting Up the Machine
7

Setting your station ID

You should store your name and fax number to be
printed on all fax pages that you send.
1
Press Menu.
2
Press 0.
3
Press 3.
4
Enter your fax number (up to 20 digits) on the
dial pad, and then press OK.
Station ID
Fax:
5
Enter your telephone number (up to 20 digits)
on the dial pad, and then press OK.(If your
telephone number and fax number are the
same, enter the same number again.)
Station ID
Tel:
6
Use the dial pad to enter your name (up to 20
characters), and then press OK.
Station ID
Name:
Note
• Refer to the following chart for entering your name.
• If you need to enter a character that is on the same
key as the previous character, press
the cursor to the right.
• If you entered a letter incorrectly and want to
change it, press
to the incorrect character, press Clear/Back.
Press One
key time
2 A
3 D
4 G
5 J
6 M
7 P
8 T
9 W
For more details, see "Entering Text" in the
User's Guide.
8
to move
or to move the cursor
Two Three Four
times times times
B C 2
E F 3
H I 4
K L 5
N O 6
Q R S
U V 8
X Y Z
7
Press Stop/Exit.
Note
(USA only)The Telephone Consumer Protection
Act of 1991 makes it unlawful for any person to
use a computer or electronic device to send any
message via a telephone fax machine unless such
messages clearly contain, in a margin at the top or
bottom of each transmitted page, or on the first
page of the transmission, the date and time it is
sent and an identification of the business or other
entity or other individual sending the message and
the telephone number of the sending machines or
such business, other entity or individual.To
program this information into your machine, see
Setting the date and time on page 7 and Setting
your station ID on page 8.
Five
times
A
D
G
J
M
7
T
9