Setting Your Station Id; Setting Tone Or Pulse Dialling Mode (Not Available For New Zealand) - Brother mfc-465cn Quick Setup Manual

STEP 1
Setting Up the Machine
7
Enter the time in 24-hour format on the dial
pad, and then press OK.
Date&Time
Time:
15:25
(e.g. Enter 1 5, 2 5 for 15:25.)
8
Press Stop/Exit.
9

Setting your station ID

You should store your name and fax number to be
added to all fax pages that you send.
1
Press Menu.
2
Press a or b to choose Initial Setup.
Press OK.
3
Press a or b to choose Station ID.
Press OK.
4
Enter your fax number (up to 20 digits) on the
dial pad, and then press OK. To enter a "+" for
international codes, press l. For example, to
enter the UK dialling code "+44 ", press l, 4, 4
and then the rest of your number.
Station ID Fax:
+44XXXXXXXX
5
Enter your name (up to 20 characters) using
the dial pad, and then press OK.
Station ID Name:
_
12
Note
• See the following chart for entering your name.
• If you need to enter a character that is on the same
key as the last character, press
cursor to the right.
• If you entered a letter incorrectly and want to
change it, press or
the incorrect character, press Clear/Back.
Press One Two
key time times
2 A
3 D
4 G
5 J
6 M
7 P
8 T
9 W
6
Press Stop/Exit.
Note
If you make a mistake and want to start again,
press Stop/Exit to go back to step 1.
For details, see Entering Text in
Appendixes C of the User's Guide.
10 Setting tone or pulse dialling
mode (not available for New
Zealand)
Your machine comes set for a Tone dialling service. If
you have a Pulse dialling service (rotary), you need to
change the dialling mode.
1
Press Menu.
2
Press a or b to choose Initial Setup.
Press OK.
3
Press a or b to choose Tone/Pulse.
Press OK.
4
Press a or b to choose Pulse (or Tone).
Press OK.
5
Press Stop/Exit.
to move the
to move the cursor to
Three Four
times times
B C 2
E F 3
H I 4
K L 5
N O 6
Q R S
U V 8
X Y Z