Setting Your Station Id - Brother MFC-8460N Quick Setup Manual

6

Setting your Station ID

You should store your name and fax number to be printed on all fax pages that you send.
1
Press Menu.
2
Press 0.
3
Press 3.
4
Enter your fax number (up to 20 digits) on
the dial pad, and then press OK. To enter a
"+" for international dialling codes, press
For example, to enter the UK dialling code
"+44", press , 4, 4, and then rest of your
number.
03.Station ID
Fax:_
Enter & OK Key
5
Enter your telephone number (up to 20
digits) on the dial pad, and then press OK.
(If your telephone number and fax number
are the same, enter the same number
again.)
03.Station ID
Fax:+44XXXXXXXX
Tel:_
Enter & OK Key
6
Use the dial pad to enter your name (up to
20 characters), and then press OK.
03.Station ID
Fax:+44XXXXXXXX
Tel:+44XXXXXXXX
Name:_
Enter & OK Key
■ Refer to the following chart for entering
your name.
■ If you need to enter a character that is on
the same key as the previous character,
press to move the cursor to the right.
■ If you entered a letter incorrectly and want
to change it, press
under the incorrect character, press
Clear/Back.
Press One Two
key time times
.
to move the cursor
Three Four
times times
2 A
3 D
4 G
5 J
6 M
7 P
8 T
9 W
For more details, see "Entering Text" in
Chapter D of the User's Guide.
7
Press Stop/Exit.
B C 2
E F 3
H I 4
K L 5
N O 6
Q R S
U V 8
X Y Z
9