Macintosh; For Usb Interface Cable Users; 10.2.4 Or Greater; For Mac Os ® X 10.2.4 Or Greater - Brother MFC-7840W Quick Setup Manual

Installing the Driver & Software

For USB Interface Cable Users

4
®
For Mac OS X 10.2.4 or greater
Important
Make sure that you have finished the
instructions from step 1 Setting Up the
Machine on pages 4 through 11.
Note
®
For Mac OS X 10.2.0 to 10.2.3 users, upgrade to
®
Mac OS X 10.2.4 or greater. (For the latest
information for Mac OS
http://solutions.brother.com/)
1
Plug the AC power cord into an AC outlet. Turn
the power switch on.
2
Connect the USB interface cable to your
computer, and then connect it to the machine.
Improper Setup
DO NOT connect the machine to a USB port on
a keyboard or a non-powered USB hub.
Brother recommends that you connect the
machine directly to your computer.
3
Turn on your Macintosh
®
X, visit
®
.
4
Put the supplied CD-ROM into your CD-ROM
drive.
5
Double-click the Start Here OSX icon to install.
Follow the on-screen instructions.
Note
Please see the Software User's Guide on the CD-
ROM if you want to install the PS driver.
6
Choose Local Connection (USB), and then
click Next. The installation will continue.
Note
Please wait, it will take a few seconds for the
software to install. After the installation, click
Restart to finish installing the software.
®

Macintosh

29