Using the Quality Key
The Quality key changes the settings for quality (DRAFT, NORMAL, HIGH or PHOTO).
DRAFT:
NORMAL:
HIGH:
PHOTO:
1
Place the document to be copied in the feeder.
2
Press Quality. The screen displays the default setting.
3
Press
or
to select copy quality resolution.
QUALITY:NORMAL
QUALITY:HIGH
QUALITY:DRAFT
QUALITY:PHOTO
4
When the screen displays your selection, press Set.
Using the Options Key
The Options key changes the settings for paper type, brightness and special copy options for the
next fax only. These options will be displayed in the order of the chart below.
Press Options.
COPY:PAPER TYPE
COPY:BRIGHTNESS
COPY:OPTIONS
1
Place the original face down in the ADF.
2
Press Options.
54
Chapter 10
Fast copy speed and lowest ink consumption. Use DRAFT to save time
(documents to be proof-read, large documents, or many copies).
Recommended mode for ordinary printouts. Good copy quality with
adequate copy speed.
Better copy quality than normal and faster copy speed than PHOTO.
Use this mode to copy precise images such as photographs. PHOTO uses
the highest resolution and slowest speed.
PAPER:PLAIN
PAPER:INK JET
PAPER:GLOSSY
PAPER:PHOTO
PAPER:TRNSPRNCY
–
OPTIONS:STACK
OPTIONS:SORT
COLOR:OFF
OPTIONS:2 IN 1
OPTIONS:4 IN 1
INK JET:BROTHER
INK JET:OTHER
+
is default