Wlan Module; Intel Wi-Fi 6 Ax201 Ax 2×2 + Bluetooth 5.0 Mu-Mimo M.2 1216 Non-Vpro 160 Mhz Mipi+Bri Ww Tbd-001 - HP ENVY x360 13 Maintenance And Service Manual

Remove the battery:
1. Disconnect the battery cable (1) from the system board.
2. Remove the six Phillips M2.0×4.0 screws (2) that secure the battery to the keyboard/top cover.
3. Remove the battery (3).
To insert the battery, reverse the removal procedures.

WLAN module

To remove the WLAN module, use this procedure and illustration.
Table 5-3 WLAN module description and part number
Description
Intel Wi-Fi 6 AX201 ax 2×2 + Bluetooth 5.0 MU-MIMO M.2 1216 non-vPro 160 MHz MIPI+BRI WW with 2
antennas WLAN module
IMPORTANT:
authorized for use in the computer by the governmental agency that regulates wireless devices in your country
or region. If you replace the module and then receive a warning message, remove the module to restore device
functionality, and then contact technical support.
Before removing the WLAN module, follow these steps:
ENWW
To prevent an unresponsive system, replace the wireless module only with a wireless module
Spare part number
TBD-001
Component replacement procedures 35