Electrostatic Discharge Information; Generating Static Electricity - HP ENVY x360 13 Maintenance And Service Manual

Electrostatic discharge information

A sudden discharge of static electricity from your finger or other conductor can destroy static-sensitive devices
or microcircuitry. Often the spark is neither felt nor heard, but damage occurs. An electronic device exposed to
electrostatic discharge (ESD) might not appear to be affected at all and can work perfectly throughout a normal
cycle. The device might function normally for a while, but it has been degraded in the internal layers, reducing its
life expectancy.
Networks built into many integrated circuits provide some protection, but in many cases, the discharge contains
enough power to alter device parameters or melt silicon junctions.
IMPORTANT:
precautions:
Keep components in their electrostatic-safe containers until you are ready to install them.
Before touching an electronic component, discharge static electricity by using the guidelines described
grounding methods and equipment on page
Avoid touching pins, leads, and circuitry. Handle electronic components as little as possible.
If you remove a component, place it in an electrostatic-safe container.

Generating static electricity

Follow these static electricity guidelines.
Different activities generate different amounts of static electricity.
●
Static electricity increases as humidity decreases.
●
Table 4-1 Static electricity occurrence based on activity and humidity
Event
Walking across carpet
Walking across vinyl floor
Motions of bench worker
Removing DIPs (dual in-line packages) from plastic tube
Removing DIPs from vinyl tray
Removing DIPs from polystyrene foam
Removing bubble pack from PCB (printed circuit board)
Packing PCBs in foam-lined box
Multiple electric components can be packaged together in plastic tubes, trays, or polystyrene foam.
NOTE: As little as 700 V can degrade a product.
26 Chapter 4 Removal and replacement procedures preliminary requirements
To prevent damage to the device when you remove or install internal components, observe these
27.
Relative humidity
55% 40%
7,500 V 15,000 V
3,000 V 5,000 V
400 V 800 V
400 V 700 V
2,000 V 4,000 V
3,500 V 5,000 V
7,000 V 20,000 V
5,000 V 11,000 V
Personal
10%
35,000 V
12,000 V
6,000 V
2,000 V
11,500 V
14,500 V
26,500 V
21,000 V
ENWW