Advertisement
Quick Links
Product End-of-Life Disassembly Instructions
Product Category: Personal Computers
Marketing Name / Model
[List multiple models if applicable.]
HP ENVY Phoenix Desktop PC 850 / HP ENVY Phoenix Desktop PC 860
Purpose: The document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic instructions
for the disassembly of HP products to remove components and materials requiring selective treatment, as defined by EU
directive 2002/96/EC, Waste Electrical and Electronic Equipment (WEEE).
1.0 Items Requiring Selective Treatment
1.1 Items listed below are classified as requiring selective treatment.
1.2 Enter the quantity of items contained within the product which require selective treatment in the right column, as
applicable.
Item Description
Printed Circuit Boards (PCB) or Printed Circuit
Assemblies (PCA)
Batteries
Mercury-containing components
Liquid Crystal Displays (LCD) with a surface
greater than 100 sq cm
Cathode Ray Tubes (CRT)
Capacitors / condensers (Containing PCB/PCT)
Electrolytic Capacitors / Condensers measuring
greater than 2.5 cm in diameter or height
External electrical cables and cords
Gas Discharge Lamps
Plastics containing Brominated Flame Retardants
weighing > 25 grams (not including PCBs or PCAs
already listed as a separate item above)
Components and parts containing toner and ink,
including liquids, semi-liquids (gel/paste) and toner
Components and waste containing asbestos
EL-MF877-00
Template Revision B
Notes
With a surface greater than 10 sq cm
MB, Memory,HDD PCA,GFX PCAODD PCA,PSU
PCA(2)
All types including standard alkaline and lithium
coin or button style batteries MB
For example, mercury in lamps, display backlights,
scanner lamps, switches, batteries
Includes background illuminated displays with gas
discharge lamps
PSU
Power cord
system fan, Cooler fan,PSU fan
Include the cartridges, print heads, tubes, vent
chambers, and service stations.
PSG instructions for this template are available at
EL-MF877-01
Quantity
of items
included
in product
7
1
0
0
0
0
2
1
0
3
0
0
Page 1
Advertisement
Related Manuals for HP ENVY Phoenix 850
Summary of Contents for HP ENVY Phoenix 850
- Page 1 Purpose: The document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic instructions for the disassembly of HP products to remove components and materials requiring selective treatment, as defined by EU directive 2002/96/EC, Waste Electrical and Electronic Equipment (WEEE).
- Page 2 Components, parts and materials containing refractory ceramic fibers Components, parts and materials containing radioactive substances 2.0 Tools Required List the type and size of the tools that would typically be used to disassemble the product to a point where components and materials requiring selective treatment can be removed.
- Page 3 1. Remove access panel from the unit. Release screw on the access panel. Griping the tab at the end of access panel, pull towards the rear and remove it from unit. EL-MF877-00 Page 3 Template Revision B PSG instructions for this template are available at EL-MF877-01...
- Page 4 2. Remove front panel from the unit. Release 3 bezel latches from chassis by pulling the bezel latches outwards. 3.Take off Top Panel from the unit EL-MF877-00 Page 4 Template Revision B PSG instructions for this template are available at EL-MF877-01...
- Page 5 4. Remove the Card reader from the unit. 5. Remove all the cable from the unit. EL-MF877-00 Page 5 Template Revision B PSG instructions for this template are available at EL-MF877-01...
- Page 6 6. Take off PSU from the unit. Rotate the screw driver to release PSU from the unit. 7. Remove HDD from the unit. EL-MF877-00 Page 6 Template Revision B PSG instructions for this template are available at EL-MF877-01...
- Page 7 8. Remove ODD from the unit. 9. Take off the Graphics Card from the unit. 10.Take off the system fan from the unit. EL-MF877-00 Page 7 Template Revision B PSG instructions for this template are available at EL-MF877-01...
- Page 8 Rotate screw driver to loose screw and take off the system fan. 11. Take off Memory from the unit. Release memory socket levers by pulling outward. EL-MF877-00 Page 8 Template Revision B PSG instructions for this template are available at EL-MF877-01...
- Page 9 12. Take off CPU cooler from the unit. Rotate the screw driver to release CPU cooler from the unit. 13. Take off PCA from the unit. EL-MF877-00 Page 9 Template Revision B PSG instructions for this template are available at EL-MF877-01...
- Page 10 14. Take off battery from the unit Rotate screw driver to loose PCA from the unit. 15. Take off PCB from the PSU. EL-MF877-00 Page 10 Template Revision B PSG instructions for this template are available at EL-MF877-01...
- Page 11 16.Take off CAP using electric iron from the PSU. EL-MF877-00 Page 11 Template Revision B PSG instructions for this template are available at EL-MF877-01...