HP ENVY x360 13 Maintenance And Service Manual page 50

a. Remove the display panel assembly.
b. Disconnect the touch control board cables from the touch control board (two locations) (1).
c. Detach the touch control board cable (2) from the display back cover. (The touch control board cable is
attached to the display back cover with double-sided adhesive.)
d. Detach the webcam/microphone module (3) from the display back cover. (The webcam/microphone
module is attached to the display back cover with double-sided adhesive.)
e. Remove the webcam/microphone module and touch control board cable.
f. Position the webcam/microphone module and touch control board cable with the webcam lens facing
up.
44 Chapter 5 Removal and replacement procedures for authorized service provider parts ENWW