Table of Contents
Advertisement
Defaults
Configuring case
defaults
M1204616
Use the Defaults menu to set the default case types that show on the
user's Start Case menu, set lung mechanics procedures available
through the user Procedures menu, and restore factory defaults.
Factory defaults are the settings installed by the manufacturer. These
cannot be changed. Select Factory Defaults to return the system to
the factory defaults.
Defaults
Case Defaults
Lung Mechanics
Factory Defaults
Previous Menu
Set the case defaults for the case types that are selectable the
Default Settings on the user's Start Case menu. In each case type,
the ventilator settings for each available ventilation mode can be
preset.
Case Defaults
Edit/View Default:
Back
Available Defaults:
ADULT
PEDIATRIC
Patient and Sensor Type Adult
LOCAL
CUSTOM 1
Previous Menu
Main Menu
1. Push the
2. Select Super User and enter the password.
3. Select Defaults - Case Defaults.
4. Select the case name to enter the adjustment window.
5. Select an item to change. Make the change.
6. Select another item to change. Make the change.
7. When finished setting the defaults, select Confirm.
12 Super user mode
ADULT
Set to Last Case
Name ADULT
Patient Weight 70 kg
Patient Age 40 y
Other Gas Air
Circuit Circle
Data Source Vent
Vent Mode VCV
-More-
key.
12-13
Advertisement
Table of Contents
