Table of Contents
Advertisement
Avance
Setting case name
Default case type
settings
Default settings for default case types
ADULT
Name
ADULT
Patient and Sensor Type
Adult
Patient Weight
70 kg
Patient Age
40 y
Other Gas
Air
Circuit
Circle
Data Source
Vent
Vent Mode
VCV
TV
500
RR
12
I:E
1:2
Tpause
Off
PEEP
Off
Pmax
40
12-14
8. Repeat to set the defaults for the other default case types.
9. When done, select Previous Menu.
10. Continue selecting Previous Menu to return to the desired menu.
Main Menu
1. Push the
2. Select Super User and enter the password.
3. Select Defaults - Case Defaults.
4. Select the name of the case to enter the adjustment window.
5. Select Name.
•
Select Clear to remove the existing name.
•
Select up to 10 characters from the list.
•
Select Delete to delete a character.
•
Select Save to save the name and close the selection
window.
•
Select Reset to return the name to the factory default name.
•
When the 10 character maximum is reached, the name is
automatically saved. The selection window closes.
•
Select Confirm.
6. Repeat to change other names.
7. When done, select Previous Menu.
8. Continue selecting Previous Menu to return to the desired menu.
Each case type has multiple settings. The default settings for the
default case types show in the following table. Values in bold are
different from the default case type ADULT. A * indicates that the
setting is not used for the default ventilation mode in the case type.
Use the empty columns to write in facility changes.
Note
VCV ADULT settings are used as the default if the system does not
have the optional ventilation mode shown.
PEDIATRIC
PEDIATRIC
Pedi
18 kg
5 y
Air
Circle
Vent
PCV
*
*
*
*
*
*
key.
LOCAL
CUSTOM 1
LOCAL
CUSTOM 1
Adult
Adult
70 kg
70 kg
40 y
40 y
Air
Air
Circle
Circle
Vent
Vent
VCV
VCV
500
500
12
12
1:2
1:2
Off
Off
Off
Off
40
40
M1204616
Advertisement
Table of Contents
