Table of Contents
Advertisement
Setting split screen
Setting sweep speed
Setting display
brightness
Setting time and date
M1204616
3. Select O2% or Flow.
When set to O2%, balance gas adjusts automatically when either
the O2% or the total flow is changed using the gas quick keys.
When set to Flow, balance gas and the O2% are controlled
individually using the gas quick keys.
Normal Screen
4. Push the
Use the Split Screen setting to show gas and agent delivery, trends,
spirometry loops, Paw gauge, or airway compliance alongside the
waveforms on the normal screen.
Use the Split Screen setting to show gas and agent delivery, trends,
spirometry loops, metabolics, Paw gauge, or airway compliance
alongside the waveforms on the normal screen.
Note
Resistance (Raw) shows in the airway compliance split screen when
the system detects an airway module with spirometry and the module
has completed the warm-up phase.
Main Menu
1. Push the
2. Select Screen Setup - Split Screen.
3. Select the desired view.
Normal Screen
4. Push the
Use the Sweep Speed setting to set the waveform draw rate to fast
(6.25 mm/s) or slow (0.625 mm/s). When the sweep speed changes,
waveforms redraw at the new rate.
Main Menu
1. Push the
2. Select Screen Setup - Sweep Speed.
3. Set the speed to Fast or Slow.
Normal Screen
4. Push the
Use the brightness setting to adjust the contrast level of the display.
Main Menu
1. Push the
2. Select Screen Setup - Brightness.
3. Select the desired brightness level.
Normal Screen
4. Push the
Use the Time and Date menu to set the time and date. The Hour
field is dependent on the Clock Format setting. The Clock Format
can be set to a 12 or 24 hour format.
key or select Previous Menu.
key.
key or select Previous Menu.
key.
key or select Previous Menu.
key.
key or select Previous Menu.
3 Operation
3-17
Advertisement
Table of Contents
