Installing Rectangular Devices - turck TN-IOL2 Series Instructions For Use Manual

Installing

Installing rectangular devices

5.2 Installing rectangular devices
„ Install the device with the appropriate fixing accessories so that the front cap of the
devices fully protrudes from the surrounding area.
„
Observe the minimum distances between read/write heads.
Fig. 6: Mounting distances
„
Avoid metal in the proximity of the read/write head. Metal rails or similar objects must
not intersect the transmission zone.
„ Protect the device from heat radiation, rapid temperature fluctuations, severe contamin-
ation, electrostatic charge and mechanical damage.
12
Hans Turck GmbH & Co. KG | T +49 208 4952-0 | F +49 208 4952-264 | more@turck.com | www.turck.com