PCI Photon 8 Port RS232
All COM ports present will be listed under the entry "Ports
(COM & LPT)." The above screenshot indicates that COM13 and
above are not installed.
PCI Photon Card Port Settings In Win 95/98.
Double clicking upon an individual port entry in the Device
Manager, and selecting the Port Settings tab will display:
Settings available in this window are:
1. Baud Rate.
2. Data Bits.
3. Parity.
4. Stop Bits.
5. Flow Control.
6. Restore Defaults - When clicked, this will reset the selected
port to the default values of:
Baud Rate:
Data Bits:
Parity:
Stop Bits:
Flow Control:
Change to suit remote device.
9600
8
None
1
Xon / Xoff
Software Installation
Chapter 3 Page 29