Chapter 3 Page 13 - Brainboxes CC-607 Hardware Manual

PCI Photon Twin 9
All" button will select all installed components for deletion and
selecting "Add All" chooses all uninstalled components for
installation. Several of the components have user selectable
parameters, e.g. target install directory, which can be changed by
clicking on the button. These options may not be changed once
the components have been installed. A README.TXT file on the
disk contains details of the latest updates to this software,
Note: If it is necessary to re-install an OLDER version of a
component then the NEWER version component must be FIRST
removed by selecting the component's button in the "Uninstall"
column then selecting the "Continue" button.
If only logical ports COM1 to COM9 are to be used then
de-select the Comms API library option button in the "Install"
column. This library is only necessary to allow the use of logical
ports greater than COM9 e.g. COM10, COM11 etc.
Figure 3-1. Setup Program Main Display.
Selecting the Continue button will start the installation process.
When the setup program has finished select the Done button. A
Windows restart message will be shown only if the Windows
communications driver option has been selected, and you should
choose Yes to allow the new driver to run.
Software Installation

Chapter 3 Page 13