Pci Photon Twin 9 Card Settings In Win95/98 - Brainboxes CC-607 Hardware Manual

PCI Photon Twin 9
After copying the files Windows 95 will then detect each
of the serial ports in turn and install them as Photon Twin 9
communications ports.
The Device Manager, reached by clicking on 'System' in the
Control Panel, now shows the presence of the PCI Photon Twin 9
Card under Multi-function adapters. See below.
If there are no other serial port cards installed above COM 4, the
PCI Photon Twin 9 will appear as COM5 & COM6. If there
already are more than 5 COM ports installed the Multiport card
ports will appear as the next highest available COM ports. PCI
Photon Cards do not appear with the COM1 to COM4 assignment
since these ports are reserved for legacy ISA cards.

PCI Photon Twin 9 Card Settings In Win95/98.

Double clicking a card entry under the "Multi-Function
Adapters", in Device Manager will display general properties for
the selected card.
Software Installation
Chapter 3 Page 22