Configuring The Mvi69E-Ldm's Ethernet/Ip Address - ProSoft Technology MVI69E-LDM-MQTT Quick Start Manual

MVI69E-LDM-MQTT ♦ MQ Telemetry Transport
CompactLogix® Platform
3.3

Configuring the MVI69E-LDM's EtherNet/IP Address

Configure the MVI69E-LDM's Ethernet port IP addresses by modifying the
/etc/network/interfaces file on the module. Refer to Figure 1 for a sample
communication topology.
Refer to the MVI69E-LDM Developer Manual
interfaces file. Use an FTP client such as
of the interface file.
Interfaces file
Parameters
# We always want the loopback interface.
#
auto lo
iface lo inet loopback
#An example Ethernet card setup:
#
auto
iface eth0
address
network
netmask
broadcast
gateway
Table 1: Network Interfaces. Modify octets per network requirements.
ProSoft Technology, Inc.
for detailed information about the
WinSCP to edit the
TM
Values
(broadcast and gateway are optional)
eth0
inet static
102.168.0.250
192.168.0.0
255.255.255.0
192.168.0.255
192.169.0.1
Connecting to the MVI69E-LDM
Quick Start Guide
eth0 and eth1 sections
Page 13 of 54