Brother 1030e User Manual page 76

Retrieving the Memory Status List
You can retrieve the Memory Status List from a remote fax machine to see if you have any fax
messages.
1
Dial your fax machine's number.
2
When you hear the beep, immediately enter your Remote Access Code (1 5 9
3
When you hear two short beeps, use the dial pad to press 9 6 1.
4
Using the dial pad, enter the number (up to 20 digits) of the remote fax machine where you want
the Memory Status List forwarded, and then press # #.
You cannot use
press # .
5
After you hear your fax machine beep, hang up and wait.
Your fax machine calls the remote fax machine and sends the Memory Status List. The remote
fax machine prints the List.
Retrieving Fax Messages
1
Dial your fax machine's number.
2
When you hear the beep, immediately enter your Remote Access Code (1 5 9
3
As soon as you hear two short beeps, use the dial pad to press 9 6 2.
4
Using the dial pad, enter the number (up to 20 digits) of the remote fax machine where you want
your fax messages forwarded, and then press # #.
You cannot use
press # .
5
After you hear your fax machine beep, hang up and wait.
Your fax machine calls the remote fax machine and sends the stored documents. The remote fax
machine prints your fax messages.
70
Chapter 11
and # as dial numbers. However, if you want to store a pause,
and # as dial numbers. However, if you want to store a pause,
).
).