Activating Message Manager Mode; Message Indicator - Brother 1030e User Manual

Erasing the Outgoing Message (OGM)
1
Press Menu/Set, 8, 3.
2
Press or
press Menu/Set when the screen displays your selection.
3
Press or
4
Press 1 to erase the OGM—OR—Press 2 to exit without erasing.
5
Press Stop/Exit.

Activating Message Manager Mode

Press and hold until the button lights and the screen displays TAD:MSG MGR.
When light is out, the Message Centre is off. (See Setting Up Message Manager, page 60.)

Message Indicator

The light flashes when you have new messages and/or faxes waiting for your review.
The LCD screen displays the total number of voice
(including recorded conversations) and/or fax messages
stored in Message Manager memory.
If you press the flashing
Manager before getting your new messages, they won't be
lost. The new messages will be played automatically and
the LCD will ask you to acknowledge the new faxes:
Press 1 to print (and automatically delete) the faxes from memory—OR—Press 2 to save the faxes
in memory until printing is convenient.
What Happens When the Memory Is Full...
If the memory becomes full when you have set your machine to Message Manager
mode, the machine will change to F/T mode automatically. In this mode, the
machine can accept incoming faxes automatically. Then, if your machine should
run out of paper, the answer mode will shift automatically to manual mode. In
manual mode the call is not answered, so your caller will know to try again later.
[Answer Mode]
Print the Memory Status List and select the item to be cleared. This will clear space for new
messages and faxes to be stored in memory. (See Printing Reports, page 34.)
62
Chapter 11
to select TAD MESSAGE (or F/T MESSAGE or PAGING MSG.), and
to select ERASE MSG and press Menu/Set.
to turn off the Message
Out of Recording Paper and Memory Full
Message Manager Mode
VOICE:03 DOC:02
PRINT DOC?
1.YES 2.NO
F/T Mode
Out of Recording Paper
Memory Full
and Memory Full
Manual Mode