Using The Reports Key - Brother 1030e User Manual

Using the Reports Key

You can print the following lists and reports:
1.HELP LIST
2.QUICK-DIAL
3.JOURNAL
4.XMIT REPORT
5.TEL.INDEX
6.SYSTEM SETUP
7.MEMORY STATUS
To Print a Report
1
Make sure that there is no document in the ADF.
2
Press Memory/Reports, then enter the number (see list above) of the report you want to print.
For example, press 6 to print the SYSTEM SETUP.
3
Press Stop/Exit.
Lists basic operational steps and functions.
Lists names and numbers stored in One Touch and Speed
Dial memory, in numerical order.
Journal lists information about the last 30 incoming and
outgoing faxes. TX means Transmit; RX means Receive.
Choose if Transmission Verification Report is printed after
all Faxes sent.
Quick-dial list (above), alphabetically.
Lists settings for INITIAL SETUP, SETUP RECEIVE,
SETUP SEND, REPORT SETTING,
REMOTE FAX OPT, SETUP TAD and
MISCELLANEOUS.
Lists summary information and amount of occupied memory.
35
Printing Reports