Brother 1030e User Manual page 9

6 Making a Single Copy
Insert the document face down in the ADF.
1
Press Copy.
2
Press Copy. (See Making Copies, page 29.)
3
To cancel, press Stop/Exit.
Your machine cannot scan anything closer than 4 mm from the edge of the paper.
Do NOT pull the paper while copying is in progress.
7 Setting up the Answer phone (TAD)
Press Menu/Set, 8, 1. The screen prompts you to choose a DOC (Document) setting.
1
Press or to select ON (or OFF), and press Menu/Set.
2
The screen prompts you to choose a VOICE setting.
Press or to select your setting from the list (ON, OFF or EXT), and press
3
Menu/Set when the screen displays your selection.
Press Stop/Exit.
4
Press Menu/Set, 8, 3. The screen prompts you to choose an OGM.
5
Press or to reach TAD MESSAGE.
6
This is the only setting you can select if you want to turn the Message Manager on.
Press Menu/Set.
7
Press or to select RECORD MSG and press Menu/Set.
8
Pick up the handset to record a message.
9
For example: Hello. We are unable to take your call at this time. Please leave a message after
the tone. If you wish to send a fax, please press
start button on your machine. (See Recording the Message Manager's Outgoing Message
(TAD MESSAGE), page 61.)
Replace the handset. The Message Manager plays your OGM.
10
Press Stop/Exit.
11
Activate Message Manager (TAD) Mode by pressing
12
5 1, wait for the fax tones, then press the
.
Preparation and Simple Use Guide
3