Erasing The Outgoing Message (Ogm); Activating Message Manager Mode; Message Indicator; What Happens When The Memory Is Full - Brother MFC-925 Owner's Manual

92
C H A P T E R T E N
[Answer Mode]
See
"Printing
Reports and
Lists"
chap. 12

Erasing the Outgoing Message (OGM)

1
Press Menu, 8, 3.
Press Z or X to select TAD MESSAGE (or F/T MESSAGE or
2
PAGING MSG.).
3
Press Set when the screen displays your selection.
4
Press Erase.
5
Press 1 to erase the OGM—OR—Press 2 to exit without erasing.
6
Press Stop to exit.

Activating Message Manager Mode

Press and hold until the screen displays

Message Indicator

Message Indicator light flashes when you have voice messages and/or
faxes waiting for your review. Once you listen to the message or print the
fax, the light stops flashing.
The LCD screen displays the total number of voice (including memos)
and/or fax messages stored in Message Manager memory.
VOICE:03 DOC:02

What Happens When the Memory Is Full...

If the memory becomes full when you have set your machine to Message
Manager mode, the machine will change to F/T mode automatically. In
this mode, the machine can accept incoming faxes automatically. Then, if
your machine should run out of paper, the answer mode will shift
automatically to manual mode. In manual mode the call is not answered,
so your caller will know to try again later.
Message Manager Mode
Print the Memory Status List and select the item to be cleared. This will
clear space for new messages and faxes to be stored in memory.
TAD:MSG MGR
Out of Recording Paper and Memory Full
F/T Mode
Memory Full
Manual Mode
Out of Recording Paper
and Memory Full