Using the Reports Key
Press Reports, then press
Menu/Set.
Six reports are available:
Don't forget to set up the Fax Activity Report and Transmission Verification
Note
Report as explained on page 11-1.
or
to select the report you want, and then press
Prints the Menu Table and programming
instructions so you can see at-a-glance how to
quickly program every menu selection.
Lists names and numbers stored in One Touch
and Speed Dial memory, in numerical order.
Lists information about the last 30 incoming
and outgoing faxes. TX means Transmit; RX
means Receive.
Prints a Transmission Verification Report for
your last transmission. This information will
remain until you pick up the handset or press
Speaker Phone.
Lists settings for
RECEIVE,
SETUP
REPORTS,
TEL SERVICE
MSG
CTR.
Lists summary information of stored faxes and
the percentage of used memory.
P R I N T I N G R E P O R T S
INITIAL
SETUP,
SEND,
SETUP
and
SETUP
SETUP
11 - 2