AT&T AUDIX Voice Power Installation And Maintenance Manual page 91

14 Select Exit and press [Enter].
15 Press [F3] (CONT) to confirm that you want to return to the
UNIX Operating System prompt.
You are now ready to install the IVP System Software.
Installing AUDIX Voice Power File System
Modification Software
The AUDIX Voice Power File System Modification Software must be
installed before any other application package.
To install the AUDIX Voice Power File System Modification Software,
follow these steps:
1 Log in as root (if you are not already logged in).
2 At the # prompt, insert the first diskette of the AUDIX Voice Power
File System Modification Software into the floppy disk drive.
3 Type installpkg and press [Enter].
4 When prompted, press [Enter] again.
5 When the installation of the AUDIX Voice Power File System
Modification Software is complete, the following message displays:
The UNIX File System modification procedure has completed.
6 Press [Enter] to return to the # prompt.
Installing IVP System Software
To install the Integrated Voice Power (IVP) System software, follow
these steps:
1 Log in as root (if you are not already logged in).
2 Insert diskette 1 of the IVP System Software into the floppy disk drive.
3 At the # prompt, type installpkg and press [Enter].
4 Press [Enter] when you are ready to begin.
You will be prompted as the system needs additional information or
diskettes. Status messages are displayed as sections of the installation are
completed.
Software Installation
3-15