AT&T AUDIX Voice Power Installation And Maintenance Manual page 143

Speech Processing Library (SPPLIB)
108 (SPP_NOSAVE),
Cannot Save Shared Memory (< integer>) During < string> To Disk
The Voice Power System is attempting to save recent changes
entered into the configuration. The update was not completed
successfully.
•
Check the permissions on the directories and files in the path
/gendb/shmem/*.
•
Ensure that the root file system is not out of free space.
•
Possible damaged file system (use fsck when the system is at single
user level).
•
Possible disk or disk controller problems.
109 (VROP_GSEMA), MAJOR
Cannot Get VROPQ Semaphore To Lock It
An administrative command could not access a control semaphore.
The failure of the command is not serious, but the failure indicates
major interprocess communication failures in the system are likely to
follow soon.
•
Try stopping the Voice Power System and then restarting it. If
this is unsuccessful, a reboot of the processor will correct the
problem.
110 (VROP_LSEMA), MAJOR
Cannot Lock VROPQ Semaphore But It Should Be Available
An administrative command was unable to lock a semaphore that
was allocated to it. The failure of the command is not serious, but
the failure indicates major interprocess communication failures in the
system are likely to follow soon.
•
Try stopping the Voice Power System and then restarting it. If
this is unsuccessful, a reboot of the processor will correct the
problem.
MAJOR
APPENDIX: System Messages A-9