Table of Contents
Advertisement
4
Use the down arrow key to move the highlight to Setup Utility and
press [Enter].
Setup displays the current settings for the system on a scrollable
menu (6386SX, 6386/25, and 6386E/33 WGS) or on two pages
(6386, 6386E WGS). The settings (except for date, time, floppy disk
drive, and hard disk drive) should be similar to the following:
System Date
System Time
Base Memory Size
Base Memory Configuration
Extended Memory
Floppy Drive A:
Floppy Drive B:
Hard Disk #1
Hard Disk #2
80387 Numeric Coprocessor
3167 Numeric Coprocessor
Video Display
Keyboard
System Serial Port #1
System Serial Port #2
ROM BIOS Map Address
Speaker:
Redirect Com 1:
Redirect Corn 2:
CPU Speed
Shadow RAM Control
Cache Control
Power-on Memory Test
Parallel Port
You may find it necessary to modify the
and
port #2,
Shadow RAM Control
correct date and time.
5 To change any settings, use the cursor keys to highlight the desired item
and press the [Enter] key to select the item.
the available selections.
6 If your display includes two pages, use the [Esc] key to switch to the
second page.
2-50 Hardware Installation and Maintenance
11-27-98 Mon
10:52:59
640 KB
All Enabled
3072 KB
3.5 inch, 1.44 MB
Not Present
ESDI- 142 MB
Not Present
Not Present
Not Present
EGA or VGA
Present
Enabled as Corn 1
Disabled
1 MB Only
On
Disabled
Disabled
Fast
Disabled
Enabled
On
Enabled as LPT1
Extended Memory, System Serial
entries, and you should set the
menu will appear offering
A
Hide quick links:
Advertisement
Table of Contents
