•
Integrated Voice Power (IVP) Software, Release 1.1
•
AUDIX Voice Power Software, Release 2.0
•
Switch Integration software
•
Remote Terminal Package (if you have a remote access terminal)
•
AUDIX Voice Power Upgrade Utility R1.0 (if you are upgrading from
AUDIX Voice Power R1.1
For integrated AUDIX Voice Power with System 75 switch configurations, a
Digital Communications Protocol (DCP) port on a TN-754 board is
necessary. A port on an existing TN-754 may be used if available.
Otherwise, an additional TN-754 board must be installed in the System 75.
Introduction 1-5
Need help?
Do you have a question about the AUDIX Voice Power and is the answer not in the manual?