AT&T AUDIX Voice Power Installation And Maintenance Manual page 10

Materials Checklist
Use the following checklist to verify that you have all the hardware and
software necessary for your configuration.
•
AT&T 6386, 6386E, 6386SX, 6386/25 or 6386E/33 WCS System
Module equipped with:
– 4 MB memory (minimum)
– 3 l/2-inch, 1.44 MB floppy disk drive or 5 l/4-inch, 1.2 MB floppy
disk drive
– keyboard
– 68 MB hard disk (minimum)
– AT&T 329D VGA color monitor or AT&T 323 VGA
monochrome monitor
– AT&T VGA Video Display Controller (VDC600) Card
(not required for 6386SX WGS)
– one to three Integrated Voice Power (IVP4) circuit cards
– Digital Communications Protocol (DCP) circuit card
(for integrated AVP with System 75 switch configuration only)
– 125 MB tape drive
Note
The tape drive is not compatible with the DCP card and cannot be
used in configurations that include the DCP card.
– Optional AT&T 2224-CEO modem for remote support.
Note
This modem is not compatible with System 25 IS-II installations.
•
AT&T UNIX® Operating System V/386, Version 3.2.2
•
AUDIX Voice Power File System Modification Software
(not required for System 25 with IS-II)
1-4 Introduction