Table of Contents
Advertisement
6 Install the new Switch Integration package by following this procedure:
a At the Software Setup menu, move the cursor to Install Package
and press [Enter].
If there is more than one disk drive, select the number of the disk
drive that you wish to use.
You will be prompted to put a diskette in the floppy disk drive.
b Place the Switch Interface diskette in the floppy disk drive and
press [Enter].
Files are listed on the screen as they are moved to the hard disk.
When all copying has been completed, you will be prompted to
remove the diskette.
c When prompted, remove the diskette.
7 Start the Voice System using the following procedure:
a
Make sure the system is shut down normally before proceeding.
b
Reboot the system to start it.
Log in as audix.
c
The User Login menu appears.
d
At the User Login menu, move the cursor to Voice System
Administration and press [Enter].
The Voice System Administration menu appears.
At the Voice System Administration menu, move the cursor to
e
Configuration Management and press [Enter].
The Configuration Management menu appears.
f
At the Configuration Management menu, move the cursor to
System Control and press [Enter].
The System Control menu appears.
At the System Control menu, move the cursor to Start Voice
g
System and press [Enter].
The voice system will start.
h
Press [Enter] (CANCEL) repeatedly to return to the User Login menu.
i
At the User Login menu, move the cursor to Exit and press [Enter].
to return to the Console Login prompt.
5-6 Upgrade Procedures
Hide quick links:
Advertisement
Table of Contents
