Water Treatment; Model Designation - Advantage Engineering Titan Instruction Manual

Table of Contents

Advertisement

Titan Central Chillers
1.6

WATER TREATMENT

WARNING: Improper water treatment will void unit warranty.
A.
The use of untreated or improperly treated water in a portable chiller may result in
scaling, erosion, corrosion, algae or slime.
B.
It is recommended that the services of a qualified water treatment specialist be engaged
to determine what water treatment is required.
C.
Advantage assumes no responsibility for equipment failures which result from untreated
or improperly treated water.
D.
Do not use deionized water in this unit. Some customized units may be compatible with
deionized water. Consult the factory before using deionized water.
1.7

MODEL DESIGNATION

A.
The Serial Number identifies the exact configuration of your unit and should be available
when contacting the Factory for service or information.
B.
There maybe additional numbers and letters at the end of the model number to indicate
additional configuration options on the machine.
Model Designator for
Titan
Series Central Chillers
®
TIP - 100A
Titan
Series
®
Unit Includes a
Plastic Fluid Reservoir
Nominal Tons of Capacity
Typical placement of the Data tag. Note: Data tag may
be placed elsewhere on certain models.
ADVANTAGE ENGINEERING, INC.
525 East Stop 18 Road Greenwood, Indiana 46142
317-887-0729
Fax: 317-881-1277
Service Department Fax: 317-885-8683
Email: service@AdvantageEngineering.com
Condenser
A: Air-Cooled
W: Water-Cooled
Page: 11

Advertisement

Table of Contents
loading

Table of Contents