Advertisement
Instruction:
Instruction:
Warning:
Warning:
Warning:
Warning:
Operating Safety
Observe the warnings and cautions
below when using the Little David Label
Application Systems.
indicates that the potential for bodily injury exists, and a
caution indicates when the machine may suffer damage.
Instruction: Requirement for System Operation
Socket-outlet shall be installed near the equipment and shall
be easily accessible.
Fuses marked MDA 5A are of type: 250V, 5 Amp, Slow Blow.
Fuses marked MDA 10A are of type: 250V, 10 Amp, Slow Blow.
Warning: Potential Bodily Injury
Always turn off the electrical power before clearing jams, and before
performing maintenance. Use Proper Lock Out / Tag Out
Procedures. Never operate unit without guards in place.
Avoid liquid or excessive moisture when using the system. Do not
operate the system with wet hands, nor in a very humid environment.
Do not spill liquid on the system.
Do not touch moving parts. Turning hubs can bruise or scrape,
rapidly moving label stock can cut like a knife.
If a problem arises that is not covered in this manual, do not attempt
to repair the system yourself, instead, call your nearest service office for
immediate and correct care of the equipment. Trained personnel
should perform all adjustments and service.
Within this manual, a warning
2
Chapter
Advertisement
