Adjusting the
Applicator
Stroke Length
Optional Extended Stroke Tamp
(350mm / 14", 400mm / 16", 500mm / 20",
600mm / 24")
Assembly P/N's: .914 - LX - 350
For further details on assembly components, see Chapter 12.
Adjusting the Applicator
The applicator has four adjustments; stroke length (or distance to
product), pitch, and offset. All other timing is done through
sensors.
Background Suppressed Sensor P/N: E7367-BS2
The tamp applicator uses a sensor to detect when the applicator
has made contact with your product. It may be necessary to adjust
the sensitivity or range of this sensor to apply the label to your
desired specifications.
.914 - LX - 500
.914 - LX - 400
.914 - LX - 600