Advertisement
Controller Operation
Overview
T
his section will cover the controller aspects of the machine
and how to change the cycle functions of the labeler.
From here you will learn how to:
Typical Views of Panel View Screen Boot Sequence
Operation of the Panel View Touch Screen
Change the cycle operation from "Straight Tamp" that has a
single Linear Cylinder Applicator with touch and go sensor to
"Dual Tamp or also known as "Swing Arm" mode that has a
dual function of the rotary actuator.
Touch Screen (Note: Now Updated to a
Larger Color Screen not Shown.)
The LX600 Straight Tamp and Dual Tamp Labeler utilizes a
HMI Interface touch screen to engage (START) the unit for label
application, select the various modes (Dual Tamp or Single
Tamp), Jog (Feed) a label out on the applicator pad, show
machine status and change product / applicator delays or to
provide a bypass condition such as the STOP mode.
The unit has five save areas for each mode when selected. These
areas are handy when you are running different boxes/products
that require different product delays (label placement) or
application delays (the time the applicator arm needs to be
engaged on the product).
Chapter
10
Advertisement
