Advertisement
I C O N
K E Y
Important information
Introduction
T
hank you for purchasing the Little David™ model LX600 series
Apply Only labeler. The LX600 series apply only labelers are
designed to be versatile enough to suit a variety of carton labeling
requirements with one standard unit. All employees who will be
required to operate the labeler should read this manual to ensure proper set-
up, operating safety and a long machine life. After reading this manual you
will know how to perform the following functions,
How to position the labeler to achieve maximum performance.
How to thread the labeler and adjust the sensors to apply labels in the
most efficient manner.
How to use the controller interface.
Troubleshooting and replacing of worn or defective parts.
Throughout this manual there are several illustrations designed to help
you perform the variety of tasks described. These illustrations all depict the
right-hand version of the machine. You can tell a right hand and left hand
machine apart by facing the machine. The side with the plate holding all of
the rollers is the hand version of the machine. The hand designation of your
individual machine does not affect any of the procedures or maintenance
operations described below only that your left hand machine appears as a
mirrored image of the machine depicted in the illustrations.
1
Chapter
Advertisement
